Looking for any recommendations on QA/ Auditors type courses. Also ISO9110 standard course. Is there anything offered online
thanks
QA/Auditor
Moderators: sky's the limit, sepia, Sulako, North Shore
-
dstechnical
- Rank 2
- Posts: 76
- Joined: Wed Jul 13, 2005 10:10 pm
Re: QA/Auditor
I was a QA Auditor in Aviation but just had a in house course done by a very knowledgeable training
I did find this
http://www.avaerocouncil.ca/en/quality- ... r-workshop
I have requested information from the ccaa a few times but have received no replies.
C
I did find this
http://www.avaerocouncil.ca/en/quality- ... r-workshop
I have requested information from the ccaa a few times but have received no replies.
C
Re: QA/Auditor
I've been to these guys classes a couple of times. http://www.dtiatlanta.com/
They previously had a contract with TCCA to train all inspectors on PVI procedures. I found their information on the PVI process and QA in general very helpful. I would highly recommend Sol and Dennis. Good auditing course too. As far as AS9110, There are a lot around and I haven't been down that road yet, so don't have a recommendation there.
They previously had a contract with TCCA to train all inspectors on PVI procedures. I found their information on the PVI process and QA in general very helpful. I would highly recommend Sol and Dennis. Good auditing course too. As far as AS9110, There are a lot around and I haven't been down that road yet, so don't have a recommendation there.
