* AvCanada's Home Page * Photo Gallery * Directory * Topsites *Weather *Enter Chat * Media Kit
It is currently Wed May 22, 2013 11:31 am

View unanswered posts | View active topics




Board index » TOP AVIATION FORUMS » General Comments

All times are UTC [ DST ]

Who is chatting
Who is chatting
Enter Chat




Post new topic Reply to topic  Page 3 of 3
  [ 71 posts ]  Go to page Previous  1, 2, 3
  Previous topic | Next topic 
Author Message
Gogona
PostPosted: Thu Jul 26, 2012 3:00 am 
Offline
Rank 3
Rank 3
User avatar

Joined: Mon Jan 11, 2010 10:41 pm
Posts: 129
Strato50 wrote:
Where abouts do you plan on such a facility? I suspect there's a decent market down here?

Yes, it seems to be. The school location is still under discussion, depends on the airport who is ready to have business with us. But most likely it should be within Toronto Terminal area.


Top
 Profile  
 
Strato50
PostPosted: Sat Jul 28, 2012 4:49 am 
Offline
Rank 0
Rank 0

Joined: Fri Aug 05, 2011 5:28 am
Posts: 10
Gogona wrote:
Strato50 wrote:
Where abouts do you plan on such a facility? I suspect there's a decent market down here?

Yes, it seems to be. The school location is still under discussion, depends on the airport who is ready to have business with us. But most likely it should be within Toronto Terminal area.


Just an idea, and I'm in no way connected with or sure of this, but recently the Burlington Air Park was planning / undergoing expansion, and it seems like that area would be very accommodating of gyro's! They have grass and I believe now a paved strip, and lots of GA hangar space. Surrounded by farms!

Anyway, I'm excited this province is getting anything!


Top
 Profile  
 
Gogona
PostPosted: Sun Jul 29, 2012 3:43 am 
Offline
Rank 3
Rank 3
User avatar

Joined: Mon Jan 11, 2010 10:41 pm
Posts: 129
Yes, Burlington Airpark is actually the candidate #1, cause that's the closest airport to our home base and it has the most friendly environment.


Top
 Profile  
 
Strato50
PostPosted: Thu Aug 02, 2012 2:32 pm 
Offline
Rank 0
Rank 0

Joined: Fri Aug 05, 2011 5:28 am
Posts: 10
I just wish there was more interest in this country / province! As I said before it seems that the TC regulations are a major hamper on potential owners / operators of gyro's here..

It's even harder looking for any sort of used market in Canada, I couldn't find a single machine... and thats my next quesiton; what are any rules / regulations as far as importing a gyro from the US? I assume you'll have to pay import duty, but what will the border guard have to say when he looks at this machine on your trailer... hehe :P


Top
 Profile  
 
Panama Jack
PostPosted: Wed Aug 08, 2012 9:06 pm 
Offline
Rank 10
Rank 10
User avatar

Joined: Fri Feb 20, 2004 4:10 pm
Posts: 2628
Location: The Sandbox
Strato50 wrote:
I assume you'll have to pay import duty, but what will the border guard have to say when he looks at this machine on your trailer... hehe :P


"do you have any firearms, alcohol or tobacco?"


Top
 Profile  
 
Indanao
PostPosted: Wed Aug 08, 2012 10:41 pm 
Offline
Rank 5
Rank 5

Joined: Wed Nov 25, 2009 12:25 am
Posts: 358
How much of a scene are you looking for, there has always been a scene: http://www.rafpilots.com/
http://www.start-flying.com/new%20site/ ... htm#Canada

http://www.flight-training-instructors. ... o-training

That particular design has problems, as you will hear. But, although not many, there have been gyros around for a long time. Reason they're not too popular is because you can't go anywhere, carry anything, or get there in a hurry. And, you can probably build an Ultra Light cheaper. Interesting theory of flight though.....


Last edited by Indanao on Fri Aug 10, 2012 1:41 pm, edited 1 time in total.

Top
 Profile  
 
Taiser
PostPosted: Thu Aug 09, 2012 12:21 am 
Offline
Rank 3
Rank 3

Joined: Sat Mar 31, 2012 12:17 am
Posts: 143
Location: YQT
I just checked the "airprogyro" site in Quebec and it's gone!!! :(

Was thinking of going there in the near future and checking it out as I go to Quebec regularly...Anybody know what happened?


Top
 Profile  
 
Panama Jack
PostPosted: Fri Aug 10, 2012 5:11 am 
Offline
Rank 10
Rank 10
User avatar

Joined: Fri Feb 20, 2004 4:10 pm
Posts: 2628
Location: The Sandbox
Indanao, your http://vancouverbc.gyro.ws/ link has as much to do with gyro aircraft as the Rotary Club has to do with aficionados of Wankel engines.


Top
 Profile  
 
Indanao
PostPosted: Fri Aug 10, 2012 1:48 pm 
Offline
Rank 5
Rank 5

Joined: Wed Nov 25, 2009 12:25 am
Posts: 358
When your right - you're right. I removed the Link, which was from a quick google, but I have seen gyrocopters in somebody's back yard all over the country including B.C.. The interest has waned since RAF left, but is coming back. ( Actually, there were people working on putting a Wankel in gyros..)

( Edited to avoid the language Police.)


Top
 Profile  
 
Beefitarian
 Post subject:
PostPosted: Fri Aug 10, 2012 4:26 pm 
Offline
Rank 11
Rank 11
User avatar

Joined: Wed Dec 01, 2010 6:53 pm
Posts: 4666
Location: Basement wifi, Arches wifi or Camp ground wifi.
Not in Canada so look soon before the mods remove the link.

http://www.rotecengines.com/Projects/MurrayBarker.html


Top
 Profile  
 
Cat Driver
PostPosted: Fri Aug 10, 2012 5:01 pm 
Offline
Top Poster
Top Poster
User avatar

Joined: Mon Feb 16, 2004 4:31 am
Posts: 16649
The RAF was a very poor design and in the end it was the number of fatalities due to the design that ended RAF's career.

The little wing in the above post does not have the high risk design feature the RAF had and would be the perfect gyroplane for training.


Top
 Profile  
 
La Mouette
PostPosted: Fri Aug 10, 2012 6:49 pm 
Offline
Rank 1
Rank 1
User avatar

Joined: Thu Apr 23, 2009 12:54 am
Posts: 38
@ Taiser : Try that one. South shore of CYQB

http://www.ulpaviation.com/autogire.html

Cheers!

La Mouette


Top
 Profile  
 
Gogona
PostPosted: Sat Aug 11, 2012 1:52 am 
Offline
Rank 3
Rank 3
User avatar

Joined: Mon Jan 11, 2010 10:41 pm
Posts: 129
Cat Driver is right. When you gonna take even a short sightseen or introductory flight in the gyro (not talking about training or buying!) make sure, it has a safe design, which is not exposed to the pilot induced oscillations.

I personally would recommend to stay away from RAF2000, AirCommander and classic Bensen gyroplanes, which are the most popular models in North America. it was inevitable in just a decades, but now we are lucky enough to have a choice.


Top
 Profile  
 
Cat Driver
PostPosted: Sat Aug 11, 2012 2:41 am 
Offline
Top Poster
Top Poster
User avatar

Joined: Mon Feb 16, 2004 4:31 am
Posts: 16649
The pilot induced oscillations can and do kill people in a matter of seconds in any gyroplane with a pusher engine that has its thrust line above the vertical center of gravity.

A gyroplane derives its lift by having the relative airflow pass through the rotor disk from below.

If the machine is allowed to pitch nose down to the relative airflow to a point where the airflow is coming into the rotor disk from above its path through the air the lift is reversed.....if the thrust line is above the vertical center of lift you have a power pushover which bunts the machine end over end and is always fatal to the occupants.

I am posting this to give people a simple understandable picture of the aerodynamics of gyroplanes and as a warning of just how serious a subject this is.


Top
 Profile  
 
Cat Driver
PostPosted: Sat Aug 11, 2012 3:20 am 
Offline
Top Poster
Top Poster
User avatar

Joined: Mon Feb 16, 2004 4:31 am
Posts: 16649
In 1991 I decided to add gyroplanes to my flight school to add to the fixed wing and helicopter training I already owned.

I became involved with RAF because their gyro appeared to be so modern.

My first dissatisfaction with their gyro was its lack of pitch stability.

When I asked them why it did not have a stabilizing device that every bird has they told me it was not needed because they had designed a stable rotorhead........which of course proved to be false.

Had RAF admitted their design was flawed in several ways they could have redesigned it to fly safely, and maybe there would be more gyroplane activity in Canada.

By the way of all the flying machines I ever flew the gyro was the most fun to fly.


Top
 Profile  
 
Gogona
PostPosted: Sat Aug 11, 2012 4:15 am 
Offline
Rank 3
Rank 3
User avatar

Joined: Mon Jan 11, 2010 10:41 pm
Posts: 129
Cat Driver wrote:
Had RAF admitted their design was flawed in several ways they could have redesigned it to fly safely, and maybe there would be more gyroplane activity in Canada.

Actually, the stabilization kit for RAF2000 has been developed as early, as ten years ago, however, it was too late – RAF's reputation is still badly affected, and not only in Canada.
And here is the interesting discussion about RAF design and its upgrade - http://www.rotaryforum.com/forum/showthread.php?t=8920


Top
 Profile  
 
Cat Driver
PostPosted: Sat Aug 11, 2012 4:51 am 
Offline
Top Poster
Top Poster
User avatar

Joined: Mon Feb 16, 2004 4:31 am
Posts: 16649
I have no desire to rehash the history of RAF and its design flaws.

However for anyone who is interested in the effects of flying with and without a horizontal stabilizer here is a test you can perform very easily.

Get a ordinary dart that is used in the game of darts.

Remove the tail feathers on yours and then go play darts with your new device.

Anyone who even begins to believe all the B.S. That RAF handed out about horizontal stabalizers needs to give their heads a shake......

.......


Top
 Profile  
 
Strato50
PostPosted: Tue Aug 14, 2012 8:09 pm 
Offline
Rank 0
Rank 0

Joined: Fri Aug 05, 2011 5:28 am
Posts: 10
Just from reading a few different forums I've already come up with a list of gyro's I'm not interested in learning in OR flying in! That list is only 3 models... which is ok, considering I'd be perfectly happy in at least 4-5 models already, again just from reading.


Top
 Profile  
 
Cat Driver
PostPosted: Tue Aug 14, 2012 9:07 pm 
Offline
Top Poster
Top Poster
User avatar

Joined: Mon Feb 16, 2004 4:31 am
Posts: 16649
When deciding what gyroplanes are safe to fly be very sure you understand the physics and aerodynamics of gyroplane flight.

They are quite different from both fixed wing and helicopters especially aerodynamically.

Quote:
Briefly, it seems to me that the TC requirements for what in the US can be flown with a simpler permit are a bit in excess.


The gyroplane license is quite difficult to get in the USA....if you actually go through the full the licensing process.


Top
 Profile  
 
Shiny Side Up
PostPosted: Tue Aug 14, 2012 10:10 pm 
Offline
Rank 11
Rank 11
User avatar

Joined: Wed Feb 18, 2004 1:02 am
Posts: 3312
Location: Group W bench
Cat Driver wrote:
I have no desire to rehash the history of RAF and its design flaws.


What would you say would be the best design available out there?


Top
 Profile  
 
Cat Driver
PostPosted: Wed Aug 15, 2012 12:36 am 
Offline
Top Poster
Top Poster
User avatar

Joined: Mon Feb 16, 2004 4:31 am
Posts: 16649
Quote:

What would you say would be the best design available out there?


For stability the Little Wing because it is a tractor design.

There are several pusher designs that are close to zero vertical thrust offset and are also quite stable in pitch..

Here is a good forum on gyros where all the info one could want can be found.

http://www.rotaryforum.com/forum/index.php


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 3 of 3
  [ 71 posts ]  Go to page Previous  1, 2, 3


Board index » TOP AVIATION FORUMS » General Comments

All times are UTC [ DST ]

Who is online

Users browsing this forum: culshawm, tkdowell and 45 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group

Advertisements by Advertisement Management
 
For questions/comments please send them to
webmaster@avcanada.ca

AvCanada Topsites List
AVIATION TOP 100 - www.avitop.com Avitop.com
While the administrators and moderators of this  forum will attempt to remove or edit any generally objectionable material as  quickly as possible, it is impossible to review every message. If you feel a  topic or post is inappropriate email us at support@avcanada.ca .  By reading these forums you acknowledge that  all posts made to these forums express the views and opinions of the author and  not the administrators, moderators or webmaster (except for posts by these  people) and hence will not be held liable. This website is not responsible or liable in any way for any false or misleading messages or job ads placed at our site.   

Use AvCanada's information at your own risk!

We reserve the right to remove any messages that we deem unacceptable.
  When you post a message, your IP is logged and may be provided to concerned parties where unethical or illegal  behavior is apparent. All rights reserved.