Nanaimo (CYCD) ILS??

This forum has been developed to discuss ATS related topics.

Moderators: sky's the limit, sepia, Sulako, North Shore

Post Reply
North Shore
Rank Moderator
Rank Moderator
Posts: 5626
Joined: Mon Feb 16, 2004 3:47 pm
Location: Straight outta Dundarave...

Nanaimo (CYCD) ILS??

Post by North Shore »

Sitting in the Sim today, we were cleared for the ILS16 @CYCD. It's clearly marked on the current Terminal Area Chart, and in the current Jepp set, and in the CFS, but it's not in the CAP.

Why is that? Did 'they' simply forget a page, or is there another reason?
---------- ADS -----------
 
Big Pistons Forever
Top Poster
Top Poster
Posts: 5959
Joined: Wed Feb 18, 2004 7:17 pm
Location: West Coast

Re: Nanaimo (CYCD) ILS??

Post by Big Pistons Forever »

North Shore wrote:Sitting in the Sim today, we were cleared for the ILS16 @CYCD. It's clearly marked on the current Terminal Area Chart, and in the current Jepp set, and in the CFS, but it's not in the CAP.

Why is that? Did 'they' simply forget a page, or is there another reason?
It doesn't meet TERPs missed approach terrain clearance criteria. It is in the RCAP and the while it is in the JEPP plates I am sure there is a note on the JEPP plate indicating it is a restricted approach. The loc can and often is assigned as a hold, that is why it is on the terminal chart.
---------- ADS -----------
 
Post Reply

Return to “ATS Question Forum”