CRM 702 & 703 for the Small Operator

This forum has been developed to discuss helicopter related topics.

Moderators: sky's the limit, sepia, Sulako, North Shore

Post Reply
OTR
Rank 0
Rank 0
Posts: 4
Joined: Fri Nov 23, 2018 12:47 pm

CRM 702 & 703 for the Small Operator

Post by OTR »

In Light of the current requirements put forth by TC regarding the implementation of every 702 and 703 Operator to be compliant with a Crew Resource Management Program that will be specific to their company, inclusive of COM amendment, submission of approval to their POI and active crews trained by January 31, 2019; their is an accessible option for operators to be in compliance.

See the below information with the contact for Keith Green at the bottom. QualaTech Aero Consulting Ltd. produces a quality product to develop your "own" program.

Crew Resource Management

Transport Canada Advisory Circular 700-042
CRM COMPLIANCE REQUIREMENTS BY JANUARY 31, 2019:

1) Company Operations Manual Amendment: CRM training plan - submitted by January 31, 2019.

2) Application to Primary Operations Inspector (POI): Approval for CRM training program as applicable to company specific – submitted by January 31, 2019.

3) Active Pilots: Trained by January 31, 2019.

4) Non- Active Pilots: Trained before resuming active duty.

Transport Canada (TC) Crew Resource Management (CRM) e-learning course.

Transport Canada is offering a CRM e-learning course with the overarching goal to provide guidance necessary in the validation process of their CRM training program.
TC training objectives are as follows:
1) TC’s Advisory Circular (AC) 700-042.
2) CRM training requirements checklist that forms part of AC 700-042.
3) Non-Technical Skill Elements and its relationship with TP 6533 Approved Check Pilot Manual.

Follow the links provided and to take the time to review the 30 minute CRM e-learning course available in both official languages: http://tc.strategia.ca/client/Courses/M ... html5.html

Your Company Compliance Status?
Need a Solution?
SOLUTION:
QualaTech Aero Consulting Ltd. has the solution: providing the operator with a CRM template that meets all the requirements as per TC critical information.
1) Inclusive of 90 to 95% of critical information in a usable TRAINING FORMAT.
2) Requires 5 to 10% input by the individual operator of your company pictures / case studies / discussions etc. (Approximately 8 to 10 hours of company personnel time).
3) Promotes intellectual ownership of the CRM document and knowledge with which to inter-act with TC.
4) Easily integrates to making the correct COM amendment for TC submission.
5) Professional document for submission to the POI for review and acceptance.
INFORMATION:
Keith Green - 1-250-213-5025
k.green@qualatech.ca
---------- ADS -----------
 
Post Reply

Return to “Helicopter Forum”