Industry Standard..."Dot Above" vs. "Dot Below"?

This forum has been developed to discuss aviation related topics.

Moderators: sky's the limit, sepia, Sulako, lilfssister, North Shore, I WAS Birddog

User avatar
single_swine_herder
Rank 7
Rank 7
Posts: 627
Joined: Tue Feb 07, 2012 9:35 pm

Re: Industry Standard..."Dot Above" vs. "Dot Below"?

Post by single_swine_herder »

Canoehead wrote:What Donald said
Exactly what Donald said.

I'm rather surprised to see folks interested in describing the relative position of the desired signal, not the position of the aircraft.

SSH
---------- ADS -----------
 
bald seagull
Rank 2
Rank 2
Posts: 59
Joined: Fri Jun 22, 2007 5:59 pm

Re: Industry Standard..."Dot Above" vs. "Dot Below"?

Post by bald seagull »

Your position relative to glideslope.......then the glideslope position relative to you.

:shock:
---------- ADS -----------
 
AuxBatOn
Rank 11
Rank 11
Posts: 3283
Joined: Wed Jan 16, 2008 6:13 pm
Location: North America, sometimes

Re: Industry Standard..."Dot Above" vs. "Dot Below"?

Post by AuxBatOn »

I would rather describe what I see in the cockpit (ie: 1 dot above when below g/p). That way, what I see matches what I hear.
---------- ADS -----------
 
Going for the deck at corner
Donald
Rank 10
Rank 10
Posts: 2451
Joined: Mon Feb 16, 2004 8:34 am
Location: Canada

Re: Industry Standard..."Dot Above" vs. "Dot Below"?

Post by Donald »

AuxBatOn wrote:I would rather describe what I see in the cockpit (ie: 1 dot above when below g/p). That way, what I see matches what I hear.

In that case, you will see what you heard.

IE expectancy
---------- ADS -----------
 
User avatar
BTD
Rank (9)
Rank (9)
Posts: 1611
Joined: Wed Mar 23, 2005 8:53 pm

Re: Industry Standard..."Dot Above" vs. "Dot Below"?

Post by BTD »

In soviet russia, glideslope calls you.
---------- ADS -----------
 
tavca
Rank 0
Rank 0
Posts: 2
Joined: Thu Oct 20, 2016 11:17 am

Re: Industry Standard..."Dot Above" vs. "Dot Below"?

Post by tavca »

glides(lope) alive
---------- ADS -----------
 
Tavca
Post Reply

Return to “General Comments”