Pasco BE20

This forum has been developed to discuss aviation related topics.

Moderators: lilfssister, North Shore, sky's the limit, sepia, Sulako, I WAS Birddog

User avatar
privateer
Rank 7
Rank 7
Posts: 507
Joined: Sat Jul 23, 2005 10:49 am

Pasco BE20

Post by privateer »

I have to say that this was handled quiet nicely by the pilots. Good job getting back safely.
Detail Information
User Name: Bowyer, Brent 
Date: 2010-01-08 
Further Action Required: No 
O.P.I.: Maintenance & Manufacturing 
Narrative: A Pacific Coastal Airlines Ltd. Beech 200 operating Flight PCO411 was on an IFR flight from Vancouver to Trail, (CAD4). At 2305Z the pilot reported the right engine was shut down and requested return to Vancouver and was given clearance to do so. At 2310Z, in the vicinity of Penticton, the pilot declared an emergency and was given expeditious clearance to Vancouver. ERS on standby. Aircraft landed safely at 2357Z 
User Name: Samson, Donna 
Date: 2010-01-11 
Further Action Required: No 
O.P.I.: Maintenance & Manufacturing 
Narrative: UPDATE from JRCC: A2 - 072320Z. YVR EMERGENCY (491500N 1230720W - VANCOUVER). ACC REPORTED B200, TWIN ENGINE A/C, WITH 1 ENGINE FAILURE OVER PENTICTON. A/C RETURNED TO VANCOUVER. BUFFALO TASKED AIRBORNE TO YVR TO MONITOR, SIYAY TASKED TO STANDBY. A/C LANDED ALL OK. SIYAY - 0.0, BUF 462 442 - 0.0 [V2010-00035] 
User Name: Samson, Donna 
Date: 2010-01-13 
Further Action Required: No 
O.P.I.: Maintenance & Manufacturing 
Narrative: UPDATE / Add Info from TSB: A10P0008 - The Pacific Coastal BE20 aircraft (C-GPCP), operating as PCO411, was en route from Vancouver to Trail cruising at FL230. In the vicinity of Penticton the No. 2 engine (PWC PT6-41) indicated low oil pressure. The crew completed the appropriate QRH checklist and shut down and secured the engine. They declared an emergency, requested and were given priority to return to Vancouver at FL200. Aircraft Rescue & Fire Fighting was placed on standby. The aircraft landed at Vancouver without further event. The cause of the low oil pressure is under investigation by the company. 
User Name: Samson, Donna 
Date: 2010-01-15 
Further Action Required: No 
O.P.I.: Maintenance & Manufacturing 
Narrative: UPDATE from Maintenance & Manufacturing: The company confirmed the accuracy of the details reported and the occurrence has been recorded in their SMS reporting system. A Service Difficult Report (#20100114005) has been submitted. There have been no previous occurrences due to the particular part failure involved. 
---------- ADS -----------
 
shrack
Rank 0
Rank 0
Posts: 8
Joined: Sun May 21, 2006 9:18 am

Re: Pasco BE20

Post by shrack »

Always check those dipsticks...I know make no assumptions :smt014
---------- ADS -----------
 
User avatar
Dust Devil
Rank 11
Rank 11
Posts: 4027
Joined: Fri Jun 24, 2005 10:55 am
Location: Riderville

Re: Pasco BE20

Post by Dust Devil »

Don't you just fill out an SDR for recurring defects? I wonder what the issue was?

Glad every one made it back ok.
---------- ADS -----------
 
//=S=//


A parent's only as good as their dumbest kid. If one wins a Nobel Prize but the other gets robbed by a hooker, you failed
dtpilot
Rank 1
Rank 1
Posts: 36
Joined: Wed May 27, 2009 8:01 pm

Re: Pasco BE20

Post by dtpilot »

Blew an oil line.

Captains last flight with the company before he went to WS if you would believe it.
---------- ADS -----------
 
xsbank
Top Poster
Top Poster
Posts: 5655
Joined: Thu Apr 15, 2004 4:00 pm
Location: "The Coast"

Re: Pasco BE20

Post by xsbank »

Gee, glad it wasn't a PC12...... :twisted:
---------- ADS -----------
 
"What's it doing now?"
"Fly low and slow and throttle back in the turns."
User avatar
privateer
Rank 7
Rank 7
Posts: 507
Joined: Sat Jul 23, 2005 10:49 am

Re: Pasco BE20

Post by privateer »

Pffshh. Nice. I heard of a pc12 out of Victoria last year that blew an oil line and had to return. I bet the were shitting their pants as they saw that flying over the water and mountains at night. Nothing beats a old or new King Air! 8)
---------- ADS -----------
 
Widow
Rank Moderator
Rank Moderator
Posts: 4592
Joined: Sun Mar 26, 2006 12:57 pm
Location: Vancouver Island

Re: Pasco BE20

Post by Widow »

Dust Devil wrote:Don't you just fill out an SDR for recurring defects? I wonder what the issue was?
How would TC (or anyone) know the defects were recurring if people only reported recurring defects ??? There's always gonna be a first ...
---------- ADS -----------
 
Former Advocate for Floatplane Safety
ScudRunner
Rank 11
Rank 11
Posts: 3239
Joined: Tue Jun 08, 2004 11:58 am

Re: Pasco BE20

Post by ScudRunner »

I've said it before and ill say it again Twin Engine IFR just isn't safe.
---------- ADS -----------
 
MrWings
Rank (9)
Rank (9)
Posts: 1004
Joined: Wed May 23, 2007 10:35 am

Re: Pasco BE20

Post by MrWings »

Wouldn't it have been more prudent to land in Penticton or Kelowna than go SE over the rocks again?

Ya, I know, maintenance and management would have probably been pissed to have to fix away from base.
---------- ADS -----------
 
brownbear
Rank 4
Rank 4
Posts: 259
Joined: Tue Jan 16, 2007 11:31 pm
Location: BC

Re: Pasco BE20

Post by brownbear »

Dust Devil,
The definition of an SDR is any item that affects the safety of an aircraft if the failure of an item may cause further consequences that may affect the safety of an aircraft shall be reported. Not word for word.

Recurring is a different subject. SDR is in 591 of the CARS, read it. Not just for AMEs.

So literally anything safety related needs to be reported. Let's say this oil px fault is caused by a cracked line or broken oil cap, it needs to be reported.

Normal wear items like tires, do not need to be reported. Unless they wore out in an abnormal way and could effect safety.

The collection of this info is what gives us AD's or SB service letter or such. It's the core.
---------- ADS -----------
 
Don't be disgruntled....move on!
freakonature
Rank 5
Rank 5
Posts: 310
Joined: Sat Jun 16, 2007 9:36 pm

Re: Pasco BE20

Post by freakonature »

The cadors states a Buffalo was launched. Is this normal? Also can someone tell me what SIYAY on standby means?

Good to see all safe and sound.
---------- ADS -----------
 
User avatar
Cat Driver
Top Poster
Top Poster
Posts: 18921
Joined: Sun Feb 15, 2004 8:31 pm

Re: Pasco BE20

Post by Cat Driver »

Nothing beats a old or new King Air! 8)

Except a Turbo Commander. :mrgreen:
---------- ADS -----------
 
The hardest thing about flying is knowing when to say no


After over a half a century of flying no one ever died because of my decision not to fly.
HeavyG
Rank 1
Rank 1
Posts: 20
Joined: Sat Sep 16, 2006 12:50 am

Re: Pasco BE20

Post by HeavyG »

Siyay is the hovercraft in YVR.
---------- ADS -----------
 
freakonature
Rank 5
Rank 5
Posts: 310
Joined: Sat Jun 16, 2007 9:36 pm

Re: Pasco BE20

Post by freakonature »

Thanks Heavy G. Is that an acronym or it's name?
---------- ADS -----------
 
HeavyG
Rank 1
Rank 1
Posts: 20
Joined: Sat Sep 16, 2006 12:50 am

Re: Pasco BE20

Post by HeavyG »

---------- ADS -----------
 
User avatar
Dust Devil
Rank 11
Rank 11
Posts: 4027
Joined: Fri Jun 24, 2005 10:55 am
Location: Riderville

Re: Pasco BE20

Post by Dust Devil »

brownbear wrote:Dust Devil,
The definition of an SDR is any item that affects the safety of an aircraft if the failure of an item may cause further consequences that may affect the safety of an aircraft shall be reported. Not word for word.

Recurring is a different subject. SDR is in 591 of the CARS, read it. Not just for AMEs.

So literally anything safety related needs to be reported. Let's say this oil px fault is caused by a cracked line or broken oil cap, it needs to be reported.

Normal wear items like tires, do not need to be reported. Unless they wore out in an abnormal way and could effect safety.

The collection of this info is what gives us AD's or SB service letter or such. It's the core.
Thanks for that. Looks like I'll have to freshen up on that. And I didn't say 591 was just for AMEs

Actually it looks like 521 now
---------- ADS -----------
 
//=S=//


A parent's only as good as their dumbest kid. If one wins a Nobel Prize but the other gets robbed by a hooker, you failed
User avatar
Dust Devil
Rank 11
Rank 11
Posts: 4027
Joined: Fri Jun 24, 2005 10:55 am
Location: Riderville

Re: Pasco BE20

Post by Dust Devil »

521.403 A service difficulty report is not required for a reportable service difficulty that has been reported by another person or organization.

So how do you know if another organization has reported a service difficulty? Is there a data base somewhere?

Nevermind I found it
---------- ADS -----------
 
//=S=//


A parent's only as good as their dumbest kid. If one wins a Nobel Prize but the other gets robbed by a hooker, you failed
User avatar
brooks
Rank 4
Rank 4
Posts: 296
Joined: Fri Jan 22, 2010 7:33 pm

Re: Pasco BE20

Post by brooks »

So how about that single engine PC12? :twisted:

Maybe they could have glided to kelowna on the ILS or something.
---------- ADS -----------
 
2R
Rank 11
Rank 11
Posts: 4328
Joined: Tue Oct 19, 2004 2:25 pm
Location: left coast

Re: Pasco BE20

Post by 2R »

How many operators operate their single engine turbines on condition ?
How long can you run a single engine turbine past TBO ?
Or can you run them to destruction like a certain unnamed float operator :wink: :wink:
---------- ADS -----------
 
ahramin
Rank Moderator
Rank Moderator
Posts: 6317
Joined: Tue Feb 17, 2004 5:21 pm
Location: Vancouver

Re: Pasco BE20

Post by ahramin »

There is at least one operator who do run their engines to destruction. No TBO.
---------- ADS -----------
 
brownbear
Rank 4
Rank 4
Posts: 259
Joined: Tue Jan 16, 2007 11:31 pm
Location: BC

Re: Pasco BE20

Post by brownbear »

Hey Dust Devil,

Here is a good spot to read.

http://www.tc.gc.ca/CivilAviation/certi ... 91-001.htm

591 is still the SDR area though.

The recurring defect comment that you made earlier is not uncommon. Many people view the SDR like that. I've heard it from AME's etc many time for a long time. It's a very common misconception.

If in doubt of whether to report or not, just report. Multiple reports on the same defect (same plane, same defect) is not going to hurt anyone. Multiple defects found on different SN's of the same model should also be reports. Shows a trend that other operators would need to know about. the Severity then prompts a letter or at the worst an AD.

I always report items I find to be critical to the safety of flight, or if not found could lead to affecting the safety of flight. The rule is to report no less than 3 days since discovery. But reality is, they (TC) just want to know. Report even if you know of something that was found prior to 3 days...hell even a month or year. If the information is critical enough and could save lives timeframes don't matter. The 3 days is to be speedy with problems, rather than ignoring safety concerns.
---------- ADS -----------
 
Don't be disgruntled....move on!
Doc
Top Poster
Top Poster
Posts: 9241
Joined: Mon Feb 16, 2004 6:28 am

Re: Pasco BE20

Post by Doc »

MrWings wrote:Wouldn't it have been more prudent to land in Penticton or Kelowna than go SE over the rocks again?

Ya, I know, maintenance and management would have probably been pissed to have to fix away from base.
My thoughts as well. I wouldn't have overflown either of those airports. wx, may have been a factor though? Maintenance and management would have been a lot more pissed if they'd had a problem with the other one.

Not trying to be critical here, but we can learn from things that go well, just as we can from things that go, not so well....
---------- ADS -----------
 
805ITT
Rank 2
Rank 2
Posts: 78
Joined: Sat Apr 03, 2004 8:04 pm

Re: Pasco BE20

Post by 805ITT »

I believe weather that day had valley cap cloud that was pretty close to mins in Penticton that day, not to sure about Kelowna. The weather in the Fraser valley was clear up to FL200 and you could see Chilliwack from YVR. To draw a straight line between where the big hills that start west of Princeton to Hope isn't that far.

As for pissing off management or Mtce., I don't think they would care where they have to fix an engine as long as the aircraft is safely on the ground. Whether it is Masset or ZBB they will go where they need to go for an AOG.

Who knows what the right decision is to make other that the two guys who made that call that day, but all's well that ends well.
---------- ADS -----------
 
624
Rank 3
Rank 3
Posts: 132
Joined: Sun Feb 15, 2004 7:36 pm

Re: Pasco BE20

Post by 624 »

brownbear wrote:
591 is still the SDR area though.
591 has been changed to 521 division lX
593 is now 521 division X
check it out here
---------- ADS -----------
 
altiplano
Top Poster
Top Poster
Posts: 5687
Joined: Sat Jan 22, 2005 2:24 pm

Re: Pasco BE20

Post by altiplano »

-
---------- ADS -----------
 
Last edited by altiplano on Thu Aug 12, 2010 11:01 pm, edited 1 time in total.
Post Reply

Return to “General Comments”