You sure did ask questions regarding my statement. If you have not noticed, many high timers around here often argue with each other over the right decisions pending the situation. So what is your objective here? Trying to get a job? I agree that passing on tips and tricks can make or break you. I agree that those who have done it are more likely to succeed than those who have not. This is just common sense , however to say that because someone has experience and therefore they are completely competent is utter BS. There is no other way to say that.robertsailor1 wrote:Nobody can be considered wise that has done little. Wisdom is earned through exposure and experience.
Wisdom is very seldom associated with the young, because its usually based on experience and the young simply haven't been around long enough. That's not to diminish young peoples skills, because often their skill levels are very very high, but their wisdom/judgement can be very lacking. One of the reasons that most cultures treat their elders with such high respect is that they value wisdom. Debate is a wonderful way to gain perspective and learn, but it usually wise to treat elders with a great deal of respect when debating them. Personally over the years I love to listen to pilots that are older and wiser than myself. I don't feel a need to challenge everything they say, nor do I necessarily agree with them all the time. When I disagree I find the best way is to ask questions. You guys have some wonderful resources on this site, but from time to time you misuse them and in the end you'll be left with 1500 hour know it alls which would be a real loss.
Mechanical failures....check lists...SOPs and decisions.
Moderators: North Shore, sky's the limit, sepia, Sulako, Right Seat Captain, lilfssister
-
- Rank 5
- Posts: 372
- Joined: Fri Apr 23, 2010 7:35 pm
Re: Mechanical failures....check lists...SOPs and decisions.
-
- Rank 11
- Posts: 3074
- Joined: Sat Sep 22, 2007 6:49 am
- Location: Always moving
Re: Mechanical failures....check lists...SOPs and decisions.
Really??Insurance companies have nothing to do with this as there is no rate factor.
Maybe you should apply to fly for Miramax as a pilot flying in one of their movie shoots and get back to me about the insurance requirements thing..the truth it is all about what the insurer wants and believe me it is very strict.
The most difficult thing about flying is knowing when to say no.
After over a half a century of flying I can not remember even one trip that I refused to do that resulted in someone getting killed because of my decision not to fly.
After over a half a century of flying I can not remember even one trip that I refused to do that resulted in someone getting killed because of my decision not to fly.
-
- Top Poster
- Posts: 5926
- Joined: Wed Feb 18, 2004 7:17 pm
- Location: West Coast
Re: Mechanical failures....check lists...SOPs and decisions.
Guess I hit a nerve Huh ?. . wrote:
For anyone to suggest that I lack the professionalism to not brief my F.O. before take off I find to be insulting beyond belief.
.
-
- Rank 11
- Posts: 3074
- Joined: Sat Sep 22, 2007 6:49 am
- Location: Always moving
Re: Mechanical failures....check lists...SOPs and decisions.
Hate to disappoint you B.P.F. but what you think or say is nothing more than background static coming from someone who does not have the self worth to say it to me in person....but you have convinced me this instructors forum is best left to your type.
Guess I hit a nerve Huh ?
The most difficult thing about flying is knowing when to say no.
After over a half a century of flying I can not remember even one trip that I refused to do that resulted in someone getting killed because of my decision not to fly.
After over a half a century of flying I can not remember even one trip that I refused to do that resulted in someone getting killed because of my decision not to fly.
-
- Rank 7
- Posts: 643
- Joined: Wed Feb 02, 2011 6:05 pm
Re: Mechanical failures....check lists...SOPs and decisions.
No body said that experience makes you competent. What I said was that to be competent you need good judgment and you won't get that without experience. If you were using good judgment you would see that I was simply suggesting that all of you treat your elders with more respect
-
- Top Poster
- Posts: 5926
- Joined: Wed Feb 18, 2004 7:17 pm
- Location: West Coast
Re: Mechanical failures....check lists...SOPs and decisions.
. . wrote:Hate to disappoint you B.P.F. but what you think or say is nothing more than background static coming from someone who does not have the self worth to say it to me in person....but you have convinced me this instructors forum is best left to your type.
Guess I hit a nerve Huh ?
It is easy to be sanctimonious when you have nothing to loose. Anybody who is still working would be a fool to post their real name on an open web site and leave themselves open to rumors and innuendo's by people who hold a grudge against posters who don't agree with everything they say.
As for leaving the forum to "types like me", well if that is posters who actually post ideas, hints, tips, SOP's etc that give pilots working as instructors things to think about, rather then post after post about what a crap job we are doing and how much better everything was back in the day......well I got no problem with that

Anyway I guess I am again guilty of thread hijack so I will sign off now.
-
- Rank 7
- Posts: 643
- Joined: Wed Feb 02, 2011 6:05 pm
Re: Mechanical failures....check lists...SOPs and decisions.
As for leaving the forum to "types like me", well if that is posters who actually post ideas, hints, tips, SOP's etc that give pilots working as instructors things to think about, rather then post after post about what a crap job we are doing and how much better everything was back in the day......well I got no problem with that
Try to keep things in perspective. No one likes being told that they are not doing a good job and I understand that. I personally was involved in suggesting that current students don't have the stick and rudder skills like "back in the day" and quite simply they don't but there is way more to flying that good stick and rudder skills. Todays students are far better with instruments and have a deeper knowledge of many many other parts of aviation compared to those that came before them and it shows with the accident rate decreasing. It was two different worlds and two different types of students and instructors. I think todays instructors are far better in many ways to those of the past but in my opinion they are not as good in basic flying skills and thats primarily because of the aircraft that they use to teach on.
Try to keep things in perspective. No one likes being told that they are not doing a good job and I understand that. I personally was involved in suggesting that current students don't have the stick and rudder skills like "back in the day" and quite simply they don't but there is way more to flying that good stick and rudder skills. Todays students are far better with instruments and have a deeper knowledge of many many other parts of aviation compared to those that came before them and it shows with the accident rate decreasing. It was two different worlds and two different types of students and instructors. I think todays instructors are far better in many ways to those of the past but in my opinion they are not as good in basic flying skills and thats primarily because of the aircraft that they use to teach on.
-
- Top Poster
- Posts: 5926
- Joined: Wed Feb 18, 2004 7:17 pm
- Location: West Coast
Re: Mechanical failures....check lists...SOPs and decisions.
Exactly. The solution is not to say "old = good, new = bad" but to identify what is not as good as it should be. You are right in noting that modern trainers are so forgiving that they tolerate handling that would wreck, fleet canucks, t-carts etc. I think it is entirely possible to teach superior stick and rudder skills on a Cessna 172 and I like to think I do exactly that. The problem is you have to work at it. This means being demanding and not accepting uncoordinated flight, sloppy attitude control, or a lack of cockpit discipline. I think as a general statement this is one area were flight instructors should pay more attention to.robertsailor1 wrote:
It was two different worlds and two different types of students and instructors.
-
- Rank 5
- Posts: 372
- Joined: Fri Apr 23, 2010 7:35 pm
Re: Mechanical failures....check lists...SOPs and decisions.
I generally fail to see the "mutual" respect between the "Old" Generation and the "New" Generation. I have met very cocky , arrogant, and pathetic "Old" and "New" crews. Bottom line - just because you have 40,000 hours does not mean you are the second coming of Christ. Experience is again, one thing. The rest can be decided by those who fly beside / behind you.robertsailor1 wrote:No body said that experience makes you competent. What I said was that to be competent you need good judgment and you won't get that without experience. If you were using good judgment you would see that I was simply suggesting that all of you treat your elders with more respect
Re: Mechanical failures....check lists...SOPs and decisions.
Cat,
If you rejected at V1, why did the aircraft overrun the runway?
C-206
If you rejected at V1, why did the aircraft overrun the runway?
C-206
- Beefitarian
- Top Poster
- Posts: 6610
- Joined: Wed Dec 01, 2010 10:53 am
- Location: A couple of meters away from others.
-
- Rank 11
- Posts: 3074
- Joined: Sat Sep 22, 2007 6:49 am
- Location: Always moving
Re: Mechanical failures....check lists...SOPs and decisions.
Cat,
If you rejected at V1, why did the aircraft overrun the runway?
C-206
First lets go back to what I said at the start of this thread.
The airplane I was flying was a PBY water bomber and we had a full load of long term retardant to make it simple we will say the load weighed ten thousand pounds.I think it may be educational to relate a mechanical failure I had one day just at V.R.
At that weight V.R. will occur at approximately 72 knots using normal elevator input, V.R. in a loaded PBY is a process wherein the nose wheel will lift off the runway but the mains will stay on the runway for a few seconds before the airplane will actually get airborne.
It was just as I started the rotation that the throttle lever broke off and of course it was at full power.
I was very familiar with the airport and the over run past the actual runway, which was gravel and part of my decision making was based on the fact that I had a visual go no go point decided before take off and it was briefed. As I have explained I dropped the ten thousand pounds of retardant at the same time as I killed ignition to both engines and there was zero doubt in my mind that I could stop safely on the grass over run at the end of the runway......the only reason I started this story was to point out that mechanical failures can occur that require different methods to handle the failure.
In that case the normal action to pull power would be to pull the throttles to the closed position.....had I done that I would have had an airplane with one engine at zero thrust and the other one at full power and it would have been a real bearcat to get back under control once the yaw started.
I wish I had never started this because I can see where it is leading.....next thing will probably be someone asking me if I understand V1 / VR / V2 and all the other speeds.
In those days the machines did not require us know things like having a machine stall because we failed to remember we were in alternate law and floor alfa protect is no longer available, so pulling back on the elevator control will result in a stall....
I digress to much..... must be getting senile.

Last edited by Chuck Ellsworth on Wed Sep 28, 2011 9:11 pm, edited 2 times in total.
The most difficult thing about flying is knowing when to say no.
After over a half a century of flying I can not remember even one trip that I refused to do that resulted in someone getting killed because of my decision not to fly.
After over a half a century of flying I can not remember even one trip that I refused to do that resulted in someone getting killed because of my decision not to fly.
Re: Mechanical failures....check lists...SOPs and decisions.
I've a question.... what were you doing with the throttle at rotation time that made the lever break off?
DId you hear the one about the jurisprudence fetishist? He got off on a technicality.
-
- Rank 11
- Posts: 3074
- Joined: Sat Sep 22, 2007 6:49 am
- Location: Always moving
Re: Mechanical failures....check lists...SOPs and decisions.
I was holding it in the full power position exactly like I had done thousands of times before and since.I've a question.... what were you doing with the throttle at rotation time that made the lever break off?
The throttle broke inside the quadrant due to metal fatigue, the airplane was about thirty five years old at the time...things break on mechanical devices.
To answer your question more specifically I was not using any forces in a pushing movement that would break either throttle...it just broke off....period.
By the way your decision to turn back to the runway with the towers permission and the fact you did it safely was not something you should beat yourself up over, you made a decision based on what was going at the time and it worked just fine.
The most difficult thing about flying is knowing when to say no.
After over a half a century of flying I can not remember even one trip that I refused to do that resulted in someone getting killed because of my decision not to fly.
After over a half a century of flying I can not remember even one trip that I refused to do that resulted in someone getting killed because of my decision not to fly.
-
- Rank 7
- Posts: 643
- Joined: Wed Feb 02, 2011 6:05 pm
Re: Mechanical failures....check lists...SOPs and decisions.
I generally fail to see the "mutual" respect between the "Old" Generation and the "New" Generation. I have met very cocky , arrogant, and pathetic "Old" and "New" crews. Bottom line - just because you have 40,000 hours does not mean you are the second coming of Christ. Experience is again, one thing. The rest can be decided by those who fly beside / behind you
Some people can fly 40,000 hours and not be much better than they were at 2000 hours but usually that is the exception. Pilots by their nature tend to have egos and are often sensitive to criticism. No body enjoys a horses ass but one thing I've learned is that you don't learn much from people that are always agreeing with you, so its good to have a difference of opinion. Having said that all differences should be discussed in a respectful way and remember it is an opinion and like my friend always tells me...opinions are like assholes, everyone has one.
These forums are wonderful opportunities for younger less experienced pilots to learn things and for older wiser and experienced pilots to debate ideas....and learn things.
Some people can fly 40,000 hours and not be much better than they were at 2000 hours but usually that is the exception. Pilots by their nature tend to have egos and are often sensitive to criticism. No body enjoys a horses ass but one thing I've learned is that you don't learn much from people that are always agreeing with you, so its good to have a difference of opinion. Having said that all differences should be discussed in a respectful way and remember it is an opinion and like my friend always tells me...opinions are like assholes, everyone has one.
These forums are wonderful opportunities for younger less experienced pilots to learn things and for older wiser and experienced pilots to debate ideas....and learn things.
- Colonel Sanders
- Top Poster
- Posts: 7512
- Joined: Sun Jun 14, 2009 5:17 pm
- Location: Over Macho Grande
Re: Mechanical failures....check lists...SOPs and decisions.
Odd that so many of the experts here are surprised by this. A friend of mine had a weird engine failure in a piston twin - the fuel selector handle broke off in his hand inbetween detents, and he had to fly quite a ways with a very heavy load on one engine. That would have been easy for the keyboard pros here, but he found it dodgy.things break on mechanical devices
He always flew with his gerber multi-tool after that. He's not the only pilot I know that won't fly without one.
No, but generally you know a heluva lot about aviation. That's irrelevant these days, of course, because when someone screws up and crashes it is celebrated as a "learning opportunity".just because you have 40,000 hours does not mean you are the second coming of Christ
Re: Mechanical failures....check lists...SOPs and decisions.
because when someone screws up and crashes it is celebrated as a "learning opportunity".
How very true.

Accident speculation:
Those that post don’t know. Those that know don’t post
Those that post don’t know. Those that know don’t post
-
- Rank 5
- Posts: 372
- Joined: Fri Apr 23, 2010 7:35 pm
Re: Mechanical failures....check lists...SOPs and decisions.
Taken out of context. In the world of insurance companies, sure ...pilot's need to be insured. That has nothing to do with what my post, and the one i was referencing.. . wrote:Really??Insurance companies have nothing to do with this as there is no rate factor.
Maybe you should apply to fly for Miramax as a pilot flying in one of their movie shoots and get back to me about the insurance requirements thing..the truth it is all about what the insurer wants and believe me it is very strict.
How often do you fly in Ontario .?
-
- Rank 11
- Posts: 3074
- Joined: Sat Sep 22, 2007 6:49 am
- Location: Always moving
Re: Mechanical failures....check lists...SOPs and decisions.
How often do I fly in Ontario?
Seldom, but what does that have to do with the issue of insurance and how the insurance underwriters determine their risk exposure?
My point is risk exposure is directly tied to the experience level of the pilot.
I used the movie industry as an example of flying where experience tied directly to a pilots safety record is what determines if you are insurable.
That is a fact easily proven by the simple process of trying to get hired to fly for the movie industry.
Seldom, but what does that have to do with the issue of insurance and how the insurance underwriters determine their risk exposure?
My point is risk exposure is directly tied to the experience level of the pilot.
I used the movie industry as an example of flying where experience tied directly to a pilots safety record is what determines if you are insurable.
That is a fact easily proven by the simple process of trying to get hired to fly for the movie industry.
The most difficult thing about flying is knowing when to say no.
After over a half a century of flying I can not remember even one trip that I refused to do that resulted in someone getting killed because of my decision not to fly.
After over a half a century of flying I can not remember even one trip that I refused to do that resulted in someone getting killed because of my decision not to fly.
Re: Mechanical failures....check lists...SOPs and decisions.
Hi .. I have absolutely no knowledge of the PBY. My question is this. If you had continued the takeoff, could you have brought the aircraft back for a safe landing? Without knowing anything about the PBY I would be more inclined to fix the problem(s) airborne and bring it back for a safe landing.
Re: Mechanical failures....check lists...SOPs and decisions.
Undoubtedly this event occurred in a bygone era so I would suggest that rather than making this an in-depth educational thread make it a little lighter and more along the lines of I Learned About Flying From That... What did you take away from this day Cat?
When one realizes who their audience is it will be much easier to deliver an effective message. Endless references to the new generation of regulation following button pushing robots has been made throughout this website so nothing further needs to be said about that. Ask yourself, how is this message going to be received by the present audience? Is it going to translate well? Good or bad, right or wrong; aviation today is what it is (and of course that belongs in another thread with another title).
I don't have the luxury of a time machine to zip back to the day of the event and understand the operational philosophy of the time so perhaps my opinion is biased by what I know of today's philosophy. What was the outcome of this event? Was it regarded as good decision making and a successful conclusion?
Fast forward to now and dissect this event from a new breed of pilots and a regulator's perspective. Of course keeping in mind that we now have the advantage of decades of compiled stats and data that may suggest an alternate course of action. Anybody unfortunate enough to be in the front of that airplane as the events described would be SLAUGHTERED in today's industry. This is not a personal attack, this is a professional opinion based on the events as presented combined with my biases of the industry I operate in today.
Without the specifics, can the lesson be clearly defined?
When one realizes who their audience is it will be much easier to deliver an effective message. Endless references to the new generation of regulation following button pushing robots has been made throughout this website so nothing further needs to be said about that. Ask yourself, how is this message going to be received by the present audience? Is it going to translate well? Good or bad, right or wrong; aviation today is what it is (and of course that belongs in another thread with another title).
I don't have the luxury of a time machine to zip back to the day of the event and understand the operational philosophy of the time so perhaps my opinion is biased by what I know of today's philosophy. What was the outcome of this event? Was it regarded as good decision making and a successful conclusion?
Fast forward to now and dissect this event from a new breed of pilots and a regulator's perspective. Of course keeping in mind that we now have the advantage of decades of compiled stats and data that may suggest an alternate course of action. Anybody unfortunate enough to be in the front of that airplane as the events described would be SLAUGHTERED in today's industry. This is not a personal attack, this is a professional opinion based on the events as presented combined with my biases of the industry I operate in today.
Without the specifics, can the lesson be clearly defined?
You can interpret that however you would like.
-
- Rank 11
- Posts: 3074
- Joined: Sat Sep 22, 2007 6:49 am
- Location: Always moving
Re: Mechanical failures....check lists...SOPs and decisions.
Maybe, maybe not.Hi .. I have absolutely no knowledge of the PBY. My question is this. If you had continued the takeoff, could you have brought the aircraft back for a safe landing? Without knowing anything about the PBY I would be more inclined to fix the problem(s) airborne and bring it back for a safe landing.
The engine was time limited in the operating manual at four minutes at full power and the only engine driven hydraulic pump was on that engine. Then there was the question of would it feather on the shut down and would I have raised the gear or left it down increasing the time to climb to a safe altitude to sort things out.......the answer was I was still on the ground with room to safely stop when I made the decision to reject.
As I have stated I made a mistake here not only relating this story but in the manner I have let it unfold.When one realizes who their audience is it will be much easier to deliver an effective message. Endless references to the new generation of regulation following button pushing robots has been made throughout this website so nothing further needs to be said about that. Ask yourself, how is this message going to be received by the present audience? Is it going to translate well? Good or bad, right or wrong; aviation today is what it is (and of course that belongs in another thread with another title).
.
I and my company regarded it as good decision making as the airplane was not damaged.What was the outcome of this event? Was it regarded as good decision making and a successful conclusion?
What was the outcome of the event? It was a safe conclusion to a unusual mechanical problem.
Interesting thought, would this new breed of pilots have the mechanical and aeroplane performance knowledge to have made the decision and take the actions to safely reject the take off ?Fast forward to now and dissect this event from a new breed of pilots and a regulator's perspective.
You are telling me that in today's industry a pilot can not deviate from any rule, normal handling procedures or SOP in an emergency to save the aircraft and possibly their lives?Of course keeping in mind that we now have the advantage of decades of compiled stats and data that may suggest an alternate course of action. Anybody unfortunate enough to be in the front of that airplane as the events described would be SLAUGHTERED in today's industry.
I do not take it as a personal attack and having progressed through my career from biplanes to flying for Airbus Industries and being trained at their factory by their flight instructors I have a fair grasp of not only the past history of aviation but also today's operations.This is not a personal attack, this is a professional opinion based on the events as presented combined with my biases of the industry I operate in today.
I have gone over and over the specifics and described the failure and pointed out the risk of continuing the take off with an uncontrollable engine in a low performance heavy airplane and knowing I would not have an engine driven hydraulic pump and the risk of it not feathering and several other issues. The lesson I was trying to get across is sometimes we are faced with unusual events and with proper planning ahead.....such as in that case where I had knew I had room to stop after a reject at that speed and place down the runway.Without the specifics, can the lesson be clearly defined?
Apparently I have made a mistake in relating that event here and I will never ever make the same mistake twice because that is part of the learning process.
I have been retired from aviation for five years and when I retired I was at the top of my career having flown so many different airplanes and helicopters I cant recall all of them.
My last job was an adviser working for the Greek CAA in Athens...and my job was advising on aviation safety with regard to a new airline being planned for that region.
I am now back in aviation flying for a corporation and will soon be getting a type rating on a Bell Jetranger which the company plans to buy for a new corporate lodge we are building north west of Vancouver.....but maybe I am too out of touch with reality to think of doing this?
The most difficult thing about flying is knowing when to say no.
After over a half a century of flying I can not remember even one trip that I refused to do that resulted in someone getting killed because of my decision not to fly.
After over a half a century of flying I can not remember even one trip that I refused to do that resulted in someone getting killed because of my decision not to fly.
Re: Mechanical failures....check lists...SOPs and decisions.
. I enjoy your posts and im not your nemisis. You certainly don't need to defend your background on AvCanada. Is there a secondary/emergency/electric hydraulic system on the PBY? Why wouldn't the engine feather? Is there a mechanical pump or other method of extending the gear?
I'm all for systems knowledge and using your brain but SOPs were designed to mitigate pilots from doing "their own thing". Some SOPs are obviously better then others though.
Your outcome was good (you didnt get hurt and no metal was bent) but could have it been better? If the aircraft was flyable I would have continued the takeoff, raised the gear, dumped the load over the trees, kept climbing for 4 minutes, secured the engine, set up for final, dropped the gear and landed. But I don't know anything about the PBY.
I'm all for systems knowledge and using your brain but SOPs were designed to mitigate pilots from doing "their own thing". Some SOPs are obviously better then others though.
Your outcome was good (you didnt get hurt and no metal was bent) but could have it been better? If the aircraft was flyable I would have continued the takeoff, raised the gear, dumped the load over the trees, kept climbing for 4 minutes, secured the engine, set up for final, dropped the gear and landed. But I don't know anything about the PBY.
-
- Rank 7
- Posts: 643
- Joined: Wed Feb 02, 2011 6:05 pm
Re: Mechanical failures....check lists...SOPs and decisions.
A very good friend of mine sat on the Transportation Safety Review Board( whatever the real name is) He said approx 8 of them took in information collected and spent hours dissecting a decision made in a couple of seconds by the pilot.
Re: Mechanical failures....check lists...SOPs and decisions.
Any SOP will state in the preamble that the document is intended as a guideline and cannot cover all non-normal circumstances. When deviations are required sound pilot judgement and good decision making is expected.You are telling me that in today's industry a pilot can not deviate from any rule, normal handling procedures or SOP in an emergency to save the aircraft and possibly their lives?
Now without the benefit of the time machine to fully appreciate the situation or circumstances...
How can a take off be justified without a balanced field?
My initial findings suggest: too much weight for the available runway, reject initiated after V1, resulting in a 500' over run.
Zero fatalities and zero damage to property. Not a great day but could have been worse.
You can interpret that however you would like.