Setting the bead on goodyear 29x11.00-10 tires
Moderators: sky's the limit, sepia, Sulako, North Shore
-
ragbagflyer
- Rank 7
- Posts: 720
- Joined: Wed Feb 01, 2006 10:45 pm
- Location: Somewhere rocky or salty.
Setting the bead on goodyear 29x11.00-10 tires
--
Last edited by ragbagflyer on Mon Jun 04, 2012 6:33 pm, edited 1 time in total.
-
sky's the limit
- Rank Moderator
- Posts: 4614
- Joined: Sat Jan 22, 2005 11:38 am
- Location: Now where's the starter button on this thing???
Re: Setting the bead on goodyear 29x11.00-10 tires
Put about 80psi in there and see what happens.... If you need to suck it off the rim again, I'll send you a lemon pie. 
Re: Setting the bead on goodyear 29x11.00-10 tires
Tubeless?
Herc strap around the circumference and sit on it and bounce, remove stem and put air gun in.
I saw on myth busters or another show a can of hair spray and a match but have never tried it myself.
Herc strap around the circumference and sit on it and bounce, remove stem and put air gun in.
I saw on myth busters or another show a can of hair spray and a match but have never tried it myself.
-
Colonel Sanders
- Top Poster
- Posts: 7512
- Joined: Sun Jun 14, 2009 5:17 pm
- Location: Over Macho Grande
Re: Setting the bead on goodyear 29x11.00-10 tires
I just set an ATV tire on over the weekend using engine start assist spray. Works like a charm.longjon wrote:Tubeless?
Herc strap around the circumference and sit on it and bounce, remove stem and put air gun in.
I saw on myth busters or another show a can of hair spray and a match but have never tried it myself.
Re: Setting the bead on goodyear 29x11.00-10 tires
These are slick[youtube] http://www.youtube.com/watch?v=1jEJldQb ... ure=topics[/youtube]
